Mouse Ceramic Studio is currently offering firing services to all. We charge $0.04 per cubic inch to fire in a community firing. (Except for members), each time the work is fired, it must be paid for. Measure your piece with an inch ruler or measuring tape, you will need the length, the width, and the height, the length is the longest dimension of your piece (usually) from side to side, the width is usually front to back, and the height is the measurement from top to bottom or how tall it is. Each measurement needs to multiplied by the next so length x width x height. This will give you the cubic inches of the piece; take that amount and multiply by 0.04 to get your dollar amount. For example, a cup with handle that is 6x4x4 is 96 cubic inches; 96 x 0.04 = 3.84 so the total for this mug would be $3.84 per firing or $7.68 for bisque and glaze firing. Members only pay for bisque firings and glaze is included as a courtesy and benefit of membership.
All Categories
- Electrical Parts
- Diesel Engine Parts
- Hydraulic Parts
- Hydraulic Pump
- Hydraulic Pump Parts
- Hydraulic Seal Kits
- Hydraulic Bushing
- Hydraulic Cylinder
- Hydraulic Coupler
- Hydraulic Valve
- Hydraulic Pipe
- Hydraulic Motor
- Hydraulic Filter
- Hydraulic Auxiliary Parts
- Hydraulic Overhaul Kits
- Main and Relief Valve
- Pilot Valve
- Gear Pump
- Universal Joint
- Self Reducing Valve
- Other Hydraulic Parts
- Body Parts
- Forklift Parts
- Other Parts
Validate your login